Search This Blog

Friday 6 January 2012

Robert Bosh Placement Paper 2011

Robert BoschPlacement Paper  2011:-

1 In a class out of 150 studs  participated in various games foot ball ,basket ball, cricket are 120, 130,135 respecly and 5 stud are not playing any one of then then find the least no of studs which are are playing all  the games

a)110   b)100    c) 96  Ans a

2. 20 men can do a work in c/2 days & 30 women can do the same work in c/3 days then how many days will take to complete the work when 20 men &30wmen work together

a)5c/6    b)c/6    c) 6c/5

3. find the lateral surface of a cone with diameter of base 12feet . and the latent height is 24feet

a) 1320square f.
b) 260 square f.
c) 96 square f.
d) none

ans : c

4. Ann is shorter than Jill and Jill is taller than Tom. Which of the following inferences are true

a) Ann is taller than Tom  b)    c)         d) Data insufficient   ans : d
 
5. Sum of squares of two numbers is 404 and sum of two numbers is 22.Then product of two Numbers?

a) 20   b) 40   c) d) (Answer is 40. Two numbers are 20 and 2)
 
6). (10 | 7) would produce

a). 17
b). 3
c). 11
d). 15

7.  A 20kva transformer at full load conditions have the coreless & cu loss are 250w&300w,To get   max efficiency what will be the total loss in tr in w

a) 550  b) 500  c) 600   d) Data insufficient  Ans : b
 
8.  There was a circuit consisting of AC voltage source and one inductance. Inductance value=0.2mH AC voltage =150 sin (1000t).what is the current flowing in the circuit?

a)    b)     c )    d)

 9. Power gain of an amplifier having i/p gain of 20W and output gain of 20mW is

a) 60    b) 25   c) 10    d) 0
 
10. There was a RC circuit given with AC voltage source. Expression for capacitance was asked for charging condition. Choices were somewhat like this: a) some value multiplied by exp (-t/T)

ans --c    i= (Vs/R)exp(-t/ T)
 
11.SCR s are connected in series to get

12. according to ohms law the current density is proportional to

a) current  b) di/ds  c) applied emf    d) 

13 Two more ques on gravity ie  body is projected then find the time of fall  and some physics ques

14. Structure comparison is done

a). yes
b) no
c) compiler dependent
d)
 
15. The system in which communication occurs in both ways but not simultaneously in both ways is

a) Half simplex   b) Simplex      c) Half duplex   d) duplex
 
16. main ()
{
int a=5, b=6;
int i=0;
i=a>b? a:b;
printf (“%d”, i);
}
a) 0      b) 1       c)  6           d)5

a) high current rating b) voltage regulation c) high v rating d)some other

Ans: c 
 
17. Which one of the following is used for high speed power application?

a) BJT   b) MOSFET  c) IGBT    d) TRIAC
 
18. One question related with SCR timing dia 

19. SCR is used for

a) To achieve optimum (or maximum  ...not sure) dv/dt
b) For high current ratings
c) To achieve high voltage
d) Some other choice
 
20. State in which o/p collector current of transistor remains constant in spite of increase in base current is

a) Q point  b) Saturation   c) Cut off

21. what is the resonant frequency of parrel RLC circuit of R= 4.7 komh L= 2 micro Henry and c=30pf.

a). 20.5 MHz
b). 2.65 KHz
c). 20.5 KHz
d). none

22.for the parallel circuit (one figure is given) Is= 10mA.  R1= 2R, R2=3R, R3= 4R. R is artritary

a). 3.076mA
b). 3.76mA
  
23 . Two ques on control sys like the sys will be  stable when    the roots are

a) real & +ve  b) real & -ve  c)  d)

24 The ques on Niquest plot

25 0ne ques on root locus

26. One more question related with ADC like voltage is 8 volts. freqency 2 Mega hz. what is the converssion rate

27. Question related with serial in parallel out shift register…What is output sequence?

Ans.....    1010

28. Given one RLC circuit in which values of R, L and C were given. What is the value of frequency f?

29. #define A 10+10
main ()
{
int a;
a=A*A;
printf (“%d”, a);
}
a) 100  b) 200  c) 120  d) 400

ans : c

30. main(){
int n=0;
while(n>32767)
pf(“%d”,n);
n++
}

ans ; indefinite loop here ihe loop will continue again & again ie after 32767 the go to -32768

32. if (fun ())
{
X++;
}
X gets incremented if and only if
a)  fun () returns 0
b) fun () return 1
c) fun () return  -1
d) return a value other than 0   ans ; d

33. In dynamic memory

a) Power dissipation is less than that of static memory
b) Clock is needed
c) Refreshing is required
d) All the above
 
34. Short, int and long integers have how many bytes?

a)2,2,4        b) Machine dependant        c)2,4,8  d) Some other choice   ans : b

35. A (n) is -----------filter combination of

a) Passive        b) Active       c) AMPLIFIER            d) BOOSTER
 
36. int fun (char c)
{
int i;
static int y ;}
a) c, i are stored in stack and y stored in data segment
b)c stored in stack and i,y are stored in data segment
c) c is stored in text segment, y in data and i in stack
 
37. how would you insert pre-written code into a current program?

a) #read
b) #get
c) #include
d) #pre ans: c

38.structure may contain

a) any other structure
b) any other structure expect themselves
c) any other structure except themselves and pointed to themselves
d) none of the above

39  One ques from pointer declaration

Section II

40 If a>4,b<-1 then which of the following is true

a)2a+b<0 b) 4a<3b  c) a>4b d) some oth

41. A 16 bit monosample is used for digitization of voice. If 8 kHz is the sampling rate then the rate at which bit is transferred is

a) 128  b) 48   c)      d)

42. There was a figure of JK flip flop in which ~q is connected to J input and K=1. If clock signal is successively applied 6 times what is output sequence (q=?)

d) 010101
   
43. The relationship b/w Gain & Bandwidth?
a) Independent of each other
b) Gain decreases as bandwidth decreases
c) Gain increases as bandwidth increases till some extent after which stability decreases
 
44. In “ON CHIP” decoding memory can be decoded to

a) 2^n   b)2^n +1   c)2^n -1   d) some other choice     Ans: a

45. Half of address 0Xffffffff   is

a) 77777777   b) 80000000   c) 7FFFFFFF  d) some other choice

46. For a 4 bit succe D/A with 16v o/p the resolution is

a)10v  b)1v  c)1.6v  d)16v      Ans : b

No comments:

Post a Comment